David Hall David Hall's Profile Page

David Hall David Hall

0 Course Enrolled • 0 Course Completed

Biography

H12-831_V1.0완벽한공부문제시험준비에가장좋은기출문제공부하기

그 외, DumpTOP H12-831_V1.0 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1r-LzcaipWBYL3gNjEDRHqiLULdZS088a

DumpTOP의 Huawei H12-831_V1.0 덤프로 시험을 준비하면Huawei H12-831_V1.0시험패스를 예약한것과 같습니다. 가장 최근 출제된Huawei H12-831_V1.0시험문제를 바탕으로 만들어진 적중율 최고인 덤프로서 간단한 시험패스는 더는 꿈이 아닙니다. 덤프는 pdf파일과 온라인서비스로 되어있는데 pdf버전은 출력가능하고 온라인버전은 휴대폰에서도 작동가능합니다.

HCIP-Datacom-Advanced Routing & Switching Technology V1.0 자격증은 IT 전문가의 경력 전망을 향상시키는 국제적으로 인정받는 자격증입니다. 이 자격증은 산업에서 널리 인정되며 고용주들에게 높은 가치를 두고 있습니다. 이 자격증을 소지한 개인들은 네트워크 엔지니어, 네트워크 아키텍트 및 네트워크 보안 전문가 등 다양한 직업 기회를 추구할 수 있습니다.

시험은 OSPF, BGP, IS-IS와 같은 고급 라우팅 프로토콜뿐만 아니라 VLAN, STP, VRRP와 같은 고급 스위칭 기술을 비롯해 데이터컴 라우팅 및 스위칭 기술과 관련된 다양한 주제를 다룹니다. 후보자들은 또한 네트워크 보안 원칙을 잘 이해하고 ACL, NAT, VPN과 같은 다양한 보안 기능을 구성하고 문제 해결할 수 있는 능력을 갖추고 있어야 합니다.

>> H12-831_V1.0완벽한 공부문제 <<

H12-831_V1.0최신 업데이트 시험공부자료 & H12-831_V1.0퍼펙트 덤프 샘플문제 다운

H12-831_V1.0인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 DumpTOP가 도움을 드릴 수 있습니다. DumpTOP의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의H12-831_V1.0인증시험문제와 답을 제공합니다. DumpTOP는 최선을 다하여 여러분이 한번에H12-831_V1.0인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 DumpTOP 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.

HCIP-Datacom-Advanced Routing & Switching Technology V1.0 자격증 시험은 복잡한 데이터컴 네트워크를 설계, 구성 및 문제 해결하는 IT 전문가를 대상으로 합니다. 이 시험은 고급 라우팅 및 스위칭 기술, 네트워크 보안 및 네트워크 최적화를 비롯한 다양한 주제를 다룹니다. 시험에 합격한 개인은 해당 분야의 전문가로 인정받으며, 현대 데이터컴 네트워크의 도전에 대비할 준비가 충분합니다.

최신 HCIP-Datacom H12-831_V1.0 무료샘플문제 (Q150-Q155):

질문 # 150
MPLS needs to assign labels to messages in advance and establish an LSP before it can forward messages. LSP is divided into static LSP and dynamic LSP. Which of the following protocols can be used to establish a dynamic LSP? (Multiple choice)

A. LDP
B. PIM-SM
C. IS-IS
D. RSVP-TE

정답：A,D

질문 # 151
In the CE multi-homing scenario, if the PE enables the BGP AS number replacement function, you can also configure the Soo feature to avoid loops, that is, enable this feature through the peer soo command on the EBGP peers between PE and CE.

A. False
B. True

정답：B

질문 # 152
On the IS-IS IPv6 network shown in the figure, multi-topology is enabled on all routers. The IPv6 address of Loopback0 on R4 is 2000::/128. The IPv6 summary 2000::/64 level-1-2 command is configured in the IS-IS processes of R2 and R1. Which of the following statements is false?

A. The routing table of R3 contains the route 2000::/128.
B. The routing table of R1 contains the route 2000::/64.
C. The routing table of R2 contains the route 2000::/128.
D. The routing table of R2 contains the route 2000::/64.

정답：A

설명：
Comprehensive and Detailed In-Depth Explanation:To determine which statement is false, we need to analyze the IS-IS topology, the role of multi-topology, the IPv6 summary configuration, and the level-1-2 behavior of IS-IS routers. Let's break it down step by step:
* Understanding the IS-IS Topology and Levels:
* IS-IS supports multiple levels: Level-1 (L1) for intra-area routing, Level-2 (L2) for inter-area routing, and Level-1-2 (L1-2) routers that can operate in both levels and connect L1 and L2 areas.
* In the figure, R1 and R2 are configured as Level-1-2 routers, R3 is a Level-1-2 router, R4 is a Level-1 router, and R5 is a Level-1 router. The area borders are indicated by the system IDs (49.0001 for R4's area and 49.0002 for R3 and R5's area).
* R4's Loopback0 has the IPv6 address 2000::/128, which is a host route (a /128 prefix, representing a single address).
* Multi-Topology IS-IS for IPv6:
* Multi-topology IS-IS allows separate topologies for IPv4 and IPv6, ensuring that IPv6 routes are handled independently. Since multi-topology is enabled on all routers, IPv6 routes (like 2000::
/128 on R4) are advertised and processed within the IPv6 topology.
* This means that IPv6 routes, including the Loopback0 address of R4 (2000::/128), can be advertised across the IS-IS domain, subject to the level and summary configurations.
* IPv6 Summary Configuration (2000::/64 level-1-2):
* The command ipv6 summary 2000::/64 level-1-2 is configured in the IS-IS processes of R1 and R2. This command instructs R1 and R2 (as Level-1-2 routers) to summarize the IPv6 prefix
2000::/64 and advertise it to both Level-1 and Level-2 areas.
* Summarization means that instead of advertising the more specific route (e.g., 2000::/128 from R4), R1 and R2 advertise the less specific summary route 2000::/64. This summary route covers the 2000::/128 address of R4's Loopback0.
* Since R1 and R2 are Level-1-2 routers, they can advertise this summary to both their Level-1 neighbors (like R4 and R3) and Level-2 neighbors (across areas).
* Analyzing Each Statement:
* A. The routing table of R1 contains the route 2000::/64.
* True. R1 is a Level-1-2 router with the ipv6 summary 2000::/64 level-1-2 command configured. It advertises and installs the summary route 2000::/64 in its routing table, covering the more specific 2000::/128 from R4. Additionally, as a Level-1-2 router, R1 can learn and retain this route from its IS-IS neighbors.
* B. The routing table of R2 contains the route 2000::/64.
* True. Similar to R1, R2 is also a Level-1-2 router with the same summary command. It advertises and installs the 2000::/64 summary route in its routing table, covering R4's
2000::/128.
* C. The routing table of R3 contains the route 2000::/128.
* False. R3 is a Level-1-2 router in area 49.0002, but it receives routes from R2 (a Level-1-2 router in area 49.0001). Because R1 and R2 are configured with the ipv6 summary 2000::
/64 level-1-2 command, they advertise the summary route 2000::/64 to their neighbors, including R3. IS-IS prefers the most specific route, but the summary configuration ensures that the more specific 2000::/128 from R4 is not advertised beyond R1 and R2 unless explicitly allowed. Since R3 is in a different area and receives the summary 2000::/64 from R2, it does not have the more specific 2000::/128 route in its routing table. Therefore, this statement is false.
* D. The routing table of R2 contains the route 2000::/128.
* True. R2, as a Level-1-2 router, is directly connected to R4 (a Level-1 router) via the IS-IS topology. R4 advertises its Loopback0 address 2000::/128 to R2. Even though R2 is configured to summarize 2000::/64, it can still retain the more specific 2000::/128 route in its routing table because IS-IS allows routers to keep both summary and more specific routes, with the more specific route taking precedence for routing decisions.
* Conclusion:
* The false statement is C, as R3 does not contain the route 2000::/128 in its routing table. Instead, R3 receives the summary route 2000::/64 from R2 due to the summary configuration on R1 and R2.
References to HCIP-Datacom-Advanced Routing & Switching Technology Documents:
* HCIP-Datacom-Advanced Routing & Switching Technology V1.0, Section on IS-IS: Multi-Topology IS-IS for IPv6, Level-1 and Level-2 Operations, and Route Summarization.
* HCIP-Datacom-Advanced Routing & Switching Technology V1.0, Chapter on IPv6 Routing Protocols:
IS-IS Configuration and Behavior, Including Summary Address Commands and L1/L2 Interactions.

질문 # 153
A BGP router receives a BGP route whose AS_Path attribute is "100200300". If the router wants to reject this route, which of the following as-path-filters can it use? (Multiple choice)

A. ip as-path-filter l deny 00$
B. ip as-path-filter l deny 200
C. ip as-path-filter l deny 00.*30
D. ip as-path-filter l deny.*

정답：A,D

질문 # 154
On the IS-IS IPv6 network shown in the figure:
* Multi-topology is enabled on all routers.
* The IPv6 address of Loopback0 on R4 is 2000::4/128.
* The command ipv6 summary 2000::/64 level-2 is configured in the IS-IS processes of R2 and R1.
* The command ipv6 import-route isis level-2 into level-1 is configured in the IS-IS processes of R1, R2, and R3.

Which of the following routers have the route 2000::/64 in their routing tables?

A. R3
B. R2
C. R4
D. R5

정답：A,B

설명：
Comprehensive and Detailed In-Depth Explanation:
Understanding the IS-IS Network and IPv6 Route Summary Behavior
* IS-IS Areas and Router Roles:
* Area 49.0001 (Level-1-2): R1, R2, R4
* Area 49.0002 (Level-1-2 & Level-1): R3 (Level-1-2), R5 (Level-1 only)
* Effect of ipv6 summary 2000::/64 level-2 Command
* This command on R1 and R2 summarizes the 2000::/64 prefix for Level-2 routers.
* Instead of advertising the detailed 2000::4/128 prefix, R1 and R2 advertise only the summarized 2000::/64 route to other Level-2 routers.
* Effect of ipv6 import-route isis level-2 into level-1 Command
* This command allows Level-1 routers (like R3) to learn Level-2 routes (like 2000::/64).
* R1 and R2 redistribute the 2000::/64 summary route into Level-1 IS-IS areas, making it available to Level-1 routers.
Route Distribution Analysis for Each Router
R4 (Does Not Have 2000::/64) #
* R4 only advertises its Loopback0 (2000::4/128).
* It does not need to install the summarized 2000::/64 route, as it originates from its own loopback.
# R4 does NOT have the 2000::/64 route.
R5 (Does Not Have 2000::/64) #
* R5 is a Level-1-only router in Area 49.0002.
* It does not have a Level-2 connection to learn the summarized 2000::/64 route.
* Because R5 is Level-1 only, it can only receive routes if a default route is provided, which is not mentioned in the question.
# R5 does NOT have the 2000::/64 route.
R3 (Has 2000::/64) #
* R3 is a Level-1-2 router, meaning it can learn both Level-1 and Level-2 routes.
* Since R1 and R2 advertise the summarized 2000::/64 route into Level-2 and R3 has ipv6 import- route isis level-2 into level-1, R3 will install 2000::/64 in its routing table.
# R3 has the 2000::/64 route.
R2 (Has 2000::/64) #
* R2 is a Level-1-2 router and has the ipv6 summary 2000::/64 level-2 command enabled.
* This means R2 advertises the summarized 2000::/64 route to other Level-2 routers and installs it in its own routing table.
# R2 has the 2000::/64 route.
Final Conclusion:
# R3 has the route 2000::/64.# R2 has the route 2000::/64.# R4 does NOT have the route 2000::/64.# R5 does NOT have the route 2000::/64.
Thus, the correct answers are: C. R3, D. R2.

질문 # 155
......

H12-831_V1.0최신 업데이트 시험공부자료: https://www.dumptop.com/Huawei/H12-831_V1.0-dump.html

참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 H12-831_V1.0 시험 문제집이 있습니다: https://drive.google.com/open?id=1r-LzcaipWBYL3gNjEDRHqiLULdZS088a

David Hall David Hall

Biography

Quick Links

Resources

Support